LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1990 >> Swift GLX >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (1.0L 3-CYL - VIN [5] & 1.0L 3-CYL Turbo - VIN [2]) >> Overhaul >> Piston & Rod Assembly >> Installation

Piston & Rod Assembly: Installation

WARNING: This page is about a different car, the 1987 Chevrolet Sprint. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply engine oil to piston pin bores and connecting rod bushing. Position connecting rod with oil hole on left side of connecting rod. Using Piston Pin Remover/Installer (J-34838), position piston so arrow of piston faces up.
  2. Using an arbor press, insert piston pin until line marked on driver handle is flush with flat surface of piston.
scientia non olet · About LEMON Manuals