LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1989 >> Swift GLX, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL - VINS [3,5] & 1.6L 4-CYL - VIN [0] >> Removal & Installation >> Cylinder Head (Except Samurai) >> Removal (Sidekick & Swift)

Removal (Sidekick & Swift)

  1. Relieve fuel pressure as previously described. Remove intake and exhaust manifolds as previously described.
  2. Discharge A/C system. Remove compressor suction hose from suction pipe (if equipped). Remove timing belt. See appropriate TIMING BELT section under REMOVAL & INSTALLATION  .
  3. Loosen cylinder head bolts in reverse order of tightening sequence. See Figure . Loosen head bolts in 2 or 3 steps to prevent cylinder head warpage. Remove bolts and cylinder head.
scientia non olet · About LEMON Manuals