Camshaft Specifications

CAMSHAFT SPECIFICATIONS

Application

In. (mm)

Journal Diameter

SOHC ⁽¹⁾

1.7372-1.7381 (44.125-44.150)

1.3L DOHC

1.1007-1.1015 (27.159-27.980)

Oil Clearance

SOHC ⁽²⁾

.0020-.0036 (.050-.091)

1.3L DOHC ⁽⁵⁾

.0008-.0024 (.020-.062)

Bearing Bore

SOHC ⁽³⁾

1.7402-1.7407 (44.200-44.216)

1.3L DOHC ⁽³⁾

1.1024-1.1032 (28.000-28.021)

Runout

.0039 (.099)

End Play

n/a

Lobe Lift

n/a

Lobe Height

SOHC ⁽⁴⁾

1.4763 (37.498)

1.3L DOHC ⁽⁶⁾

1.5920-1.5981 (40.435-40.595)

⁽¹⁾	Specification is for front journal. Journals increase in size by .0078" (.200mm) from front to rear.

⁽²⁾	Maximum oil clearance is .0059" (.15mm).

⁽³⁾	Specification is for front journal bore. Journal bores increase in size by .0078 (.200mm) from front to rear.

⁽⁴⁾	Minimum lobe height is 1.4724" (37.400mm).

⁽⁵⁾	Maximum oil clearance is .0047" (.119mm).

⁽⁶⁾	Minimum lobe height is 1.5880" (40.329mm).