Instrument Panel Lower Cover: Removal
CAUTION:
Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION
.
NOTE:
Components: Ref. to EXTERIOR/INTERIOR TRIM>GENERAL DESCRIPTION>COMPONENT>INSTRUMENT PANEL .
- Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
- Remove the cover assembly instrument panel side LH.
- Release the clips.
- Remove the cover assembly instrument panel side LH.NOTE:
- Use a plastic remover.
- If removing is difficult, remove the weather strip and remove it from the gap using a plastic remover.
- Remove the cover LWR driver.CAUTION: