DTC B1000: Airbag Ecu Malfunction

Diagnosis start condition:

When the ignition voltage is 10 - 16 V.

DTC detecting condition:

Airbag ECM inner circuit malfunction

CAUTION: Before performing diagnosis, refer to "CAUTION" in "General Description". Ref. to AIRBAG (DIAGNOSTICS)>GENERAL DESCRIPTION>CAUTION .

CHECK DTC .
1. Turn the ignition switch to ON.
2. Read the DTC of [Airbag] using the Subaru Select Monitor. Ref. to AIRBAG (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .
Is any of B1000, B1003, B1007, B1105, B1106, B1115, B1116, B1117, B1118, B1120, B1121, B1125, B1126, B1145, B1146, B1170, B117A, B1185, B1195, B1196 or B1199 displayed? (Current malfunction)

Yes: Replace the airbag control module. Ref. to AIRBAG SYSTEM>AIRBAG CONTROL MODULE .

No: Using the Subaru Select Monitor, perform the clear memory of [Airbag]. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY .