DTC P0801: Reverse Inhibit Control Circuit/Open
DTC detecting condition:
Immediately at fault recognition
Failure detection pattern:
- "Secondary" (low-priority diagnosis)
Warning light/indicator light:
- Malfunction indicator light -
- AT OIL TEMP light (blinking)
CAUTION:
After servicing or replacing faulty parts, perform the last step of the basic diagnostic procedure. Ref. to TRANSMISSION (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE
.
NOTE:
For diagnostic procedures, refer to "DTC B1016 SHIFT LOCK CIRCUIT" in "BODY CONTROL (DIAGNOSTICS)". Ref. to BODY CONTROL (DIAGNOSTICS)>DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC B1016 SHIFT LOCK CIRCUIT
.