Side impact sensor (front door)

How to disconnect:
NOTE: When pulling the slide lock or disconnecting the connector, be sure to hold the connector, not the harness, to disconnect.

Holding outer part (A), pull it in the direction of arrow.

Courtesy of SUBARU OF AMERICA, INC.
How to connect:
NOTE:
- The outer part (A) returns to the original position. Therefore do not touch the outer part.
- Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.
Holding the connector, push it in securely until a clicking sound is heard.

Courtesy of SUBARU OF AMERICA, INC.