DTC B11F2: Front Impact Deployment

Diagnosis start condition: 

When the ignition voltage is 10 - 16 V.

DTC detecting condition: 

This DTC is displayed when the front airbag module and pretensioner are deployed.

Once this DTC is displayed, the memory cannot be cleared. Refer to and follow the instructions in "When Airbag is Activated" in "List of replacement parts at frontal collision". Ref. to AIRBAG SYSTEM>INSPECTION LOCATIONS AFTER A COLLISION>INSPECTION .

Failure detection pattern: 

• "Primary" (high-priority diagnosis)

Warning light/indicator light: 

• Airbag warning light◦