DTC C1414: Software Version Mismatch
DTC detecting condition:
When the version of the HSM (hardware security module) software saved in the VDC Control Module application area does not match the version of the software read from HSM.
Trouble symptom:
- ABS does not operate.
- VDC does not operate.
- AVH does not function.
- EyeSight does not operate.
Failure detection pattern:
- "Primary" (high-priority diagnosis)
Warning light/indicator light:
The combination of DTC and warning light display may differ from the list depending on vehicle conditions and driving conditions at the time of failure detection.
- ABS warning light◦
- VDC warning light & VDC operation indicator light◦
- Electronic parking brake warning light (red)◦
- Brake warning light (EBD warning light) (red) -
NOTE:
- The concerned DTC is stored only when the HSM software is reprogrammed due to the market measures.
- Reprogramming is required for both the application and HSM areas, and the DTC is stored when reprogramming for either one of them is done.
- When reprogramming for the other area is done, both software versions match, thereby clearing the concerned DTC.