LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2024 >> Impreza Base >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System >> Door Switch >> Inspection

Door Switch: Inspection

  1. Measure the resistance between connector terminals.
    G10277284Courtesy of SUBARU OF AMERICA, INC.
    • Front
      Terminal No. Inspection conditions Standard
      2 - 1 When the switch is not pressed Less than 1 Ω
      When the switch is pressed 1 MΩ or more
    • Rear
    Terminal No. Inspection conditions Standard
    2 - 1 When the switch is not pressed Less than 1 Ω
    When the switch is pressed 1 MΩ or more
  2. Replace the door switch assembly if the inspection result is not within the standard value.
scientia non olet · About LEMON Manuals