Inspection Mode 1
| DTC | Description & trouble part | Note |
|---|---|---|
| B2900 | AHL CONTROL | - |
| B2904 | LED HEADLIGHT CIRCUIT RH | - |
| B2905 | LED HEAD LIGHT CIRCUIT LH | - |
| B2910 | STEERING RESPONSIVE HEADLIGHT COMMUNICATION RH | - |
| B2911 | STEERING RESPONSIVE HEADLIGHT COMMUNICATION LH | - |
| B2916 | AUTO HEADLAMP LEVELING CIRCUIT- | |
| B2917 | AUTO HEADLAMP LEVELING SWITCH STUCK | - |
| B2919 | AUTO HEADLAMP LEVELING SENSOR SIGNAL | - |
| B291A | AUTO HEADLAMP LEVELING SENSOR RANGE/PERFORMANCE | - |
| U0074 | CONTROL MODULE COMMUNICATION BUS "BODY-CAN" OFF | - |
| U0101 | LOST COMMUNICATION WITH TCM - | |
| U0122 | LOST COMMUNICATION WITH VEHICLE DYNAMICS CONTROL MODULE | - |
| U0402 | INVALID DATA RECEIVED FROM TCM - | |
| U0416 | INVALID DATA RECEIVED FROM VEHICLE DYNAMICS CONTROL MODULE | - |
| U1140 | LOST COMMUNICATION WITH BODY CONTROL MODULE BODY-CAN | - |
| U1422 | INVALID DATA RECEIVED FROM BODY CONTROL MODULE BODY-CAN | - |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of [Headlight/Foglight]. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY .
- Using the Subaru Select Monitor, read the DTC of [Headlight/Foglight] to check that there is no DTC displayed. Ref. to HEADLIGHT/FOGLIGHT (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1.
- Turn the ignition switch to ON, and wait for 6 seconds or more.
- Using the Subaru Select Monitor, read the DTC of [Headlight/Foglight] to check that there is no DTC displayed. Ref. to HEADLIGHT/FOGLIGHT (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.