LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2024 >> Forester Limited >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake Switch >> Inspection >> Check Harness

Check Harness

  1. Check the resistance between connector terminals.

    Preparation tool: 

    Circuit tester

    G14385277Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Standard
    1 - 2
    4 - 5    		 Always 1 MΩ or more
  2. Repair or replace the harness if the inspection result is not within the standard value.
scientia non olet · About LEMON Manuals