Inspect The Specified Position

Measure the clearance between the end of the stop light switch assembly and the stopper.

CAUTION: Be careful not to rotate the stop light switch assembly.

Stop light switch assembly clearance A:

1.5 mm (0.06 in)

Courtesy of SUBARU OF AMERICA, INC.

Adjust the position of the stop light switch assembly if the inspection result is not within the standard value. Ref. to BRAKE>STOP LIGHT SWITCH>ADJUSTMENT>CLEARANCE ADJUSTMENT .
If the stop light switch assembly does not operate properly or it is not secured at the specified position after adjustment, replace the stop light switch assembly.