LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2024 >> Ascent Limited >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation System & Driver Information Center >> Switches and Harness >> Removal >> Trip Reset Switch

Trip Reset Switch

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the ornament panel assembly driver. Ref. to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>REMOVAL .
  3. Remove the visor assembly. Ref. to INSTRUMENTATION/DRIVER INFO>COMBINATION METER>REMOVAL .
  4. Remove the switch assembly meter.
    1. Release the claws, and remove the switch assembly meter.
G13201055Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals