LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2024 >> Ascent Limited >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation System & Driver Information Center >> Switches and Harness >> Installation >> Trip Reset Switch

Trip Reset Switch

  1. Install the switch assembly meter.
  2. Connect the connector, and install the visor assembly.
  3. Install the ornament panel assembly driver.
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals