LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> WRX GT >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim & Interior Trim >> Glove Box >> Removal >> Back Panel

Back Panel

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the pocket COMPL. Ref. to EXTERIOR/INTERIOR TRIM>GLOVE BOX>REMOVAL>GLOVE BOX LID .
  3. Remove the cover assembly instrument panel side RH and the ornament assembly passenger. Ref. to EXTERIOR/INTERIOR TRIM>CENTOR CLUSTER>REMOVAL .
  4. Remove the panel instrument passenger.
    1. Remove the glove box light LED, and disconnect the connector.
    2. Remove the screws and release the claws, remove the panel instrument passenger.
    G14612999Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals