LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> WRX GT >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System >> Hazard Switch >> Removal

Hazard Switch: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the ornament panel mid passenger and panel assembly center. Ref. to EXTERIOR/INTERIOR TRIM>CENTOR CLUSTER>REMOVAL .
  3. Remove the center information display assembly. Ref. to ENTERTAINMENT & MONITORING>COCKPIT DISPLAY>REMOVAL .
  4. Remove the screws and harness clip and remove the switch hazard.
    G14612370Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals