DTC B16F7: Curtain Airbag Sensor LH Recognition Error
Diagnosis start condition:
When the ignition voltage is 10 - 16 V.
DTC detecting condition:
- Side impact sensor LH (rear wheel house) is misinstalled.
- Airbag control module is faulty.
CAUTION:
Before performing diagnosis, refer to "CAUTION" in "General Description". Ref. to AIRBAG (DIAGNOSTICS)>GENERAL DESCRIPTION>CAUTION .
- REPLACEMENT OF Side impact sensor LH (rear wheel house)
.
- Turn the ignition switch to OFF, and wait for 60 seconds or more after disconnecting the ground terminal from the battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
- Replace the Side impact sensor LH (rear wheel house) with a genuine sensor. Ref. to AIRBAG SYSTEM>IMPACT SENSOR>REMOVAL .
Does the warning light go off?
Yes: Finish the diagnosis.
No: Replace the airbag control module. Ref. to AIRBAG SYSTEM>AIRBAG CONTROL MODULE>REMOVAL .