LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> Forester Premium >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag System >> Roll Connector >> Removal

Roll Connector: Removal

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  1. Position the front wheels straight ahead.
  2. Turn the ignition switch to OFF.
  3. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  4. Remove the driver's airbag module. Ref. to AIRBAG SYSTEM>DRIVER'S AIRBAG MODULE>REMOVAL .
  5. Remove the steering wheel. Ref. to POWER ASSISTED SYSTEM (POWER STEERING)>STEERING WHEEL>REMOVAL .
  6. Remove the column cover assembly. Ref. to POWER ASSISTED SYSTEM (POWER STEERING)>STEERING COLUMN>REMOVAL .
  7. Remove the steering roll connector assembly.
    CAUTION: Make sure that the steering roll connector is not turned from the original position.
    1. Disconnect the connector under the steering roll connector. Ref. to AIRBAG SYSTEM>AIRBAG CONNECTOR>PROCEDURE>DRIVER'S AIRBAG MODULE (STEERING ROLL CONNECTOR) .
    2. Release the claws and remove the steering roll connector assembly.
    G11255151Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the sensor assembly VDC steering.
    1. Release the claws and remove the sensor assembly VDC steering (b) from the steering roll connector (a).
G13225345Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals