LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> Forester Limited >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation System & Driver Information Center >> Switches and Harness >> Removal >> Driver Monitoring System Switch

Driver Monitoring System Switch

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY
  2. Remove the cover LWR driver. Ref. to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>REMOVAL .
  3. Remove the driver monitoring system switch.
    1. Release the claws, and then remove the driver monitoring system switch (h).
    G10277283Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals