LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> Ascent Limited >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Intake System (Induction) And Turbocharger >> Air Cleaner Case >> Installation

Air Cleaner Case: Installation

  1. Install the air cleaner case bracket (A) and the side frame bracket (B).

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

    G13198573Courtesy of SUBARU OF AMERICA, INC.
  2. Install the air cleaner case (front).
    NOTE: Insert the protrusion of the air cleaner case (front) into the cushion of the air cleaner case bracket.

    Tightening torque: 

    6 N.m (0.6 kgf-m, 4.4 ft-lb)

    G13862352Courtesy of SUBARU OF AMERICA, INC.
  3. Install the air cleaner element and the air cleaner case (rear). Ref. to INTAKE (INDUCTION) (H4DOTC)>AIR CLEANER ELEMENT>INSTALLATION .
  4. Connect the turbo duct.

    Tightening torque: 

    2.5 N.m (0.3 kgf-m, 1.8 ft-lb)

  5. Connect the connector to the mass air flow and intake air temperature sensor.
  6. Install the air intake duct. Ref. to INTAKE (INDUCTION) (H4DOTC)>AIR INTAKE DUCT>INSTALLATION .
  7. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals