LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> Ascent Limited >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Radiator Fan and Fan Motor Assembly >> Installation

Radiator Fan and Fan Motor Assembly: Installation

  1. Set the radiator fan and fan motor assembly.
  2. Connect the connector to the radiator fan harness.
  3. Connect the radiator inlet hose.
  4. Install the air intake duct. Ref. to INTAKE (INDUCTION) (H4DOTC)>AIR INTAKE DUCT>INSTALLATION .
  5. Install the reservoir tank. Ref. to COOLING (H4DOTC)>RESERVOIR TANK>INSTALLATION .
  6. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  7. Fill engine coolant. Ref. to COOLING (H4DOTC)>ENGINE COOLANT>REPLACEMENT>FILLING OF ENGINE COOLANT .
scientia non olet · About LEMON Manuals