LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> Ascent Limited >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Intake System (Induction) And Turbocharger >> Intake Duct >> Removal >> Intake Duct No. 1

Intake Duct No. 1

  1. Remove the under cover front. Ref. to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER>REMOVAL .
  2. Drain engine coolant. Ref. to COOLING (H4DOTC)>ENGINE COOLANT>REPLACEMENT>DRAINING OF ENGINE COOLANT .
  3. Disconnect the air intake boot from the air intake duct No. 1.
    G13198576Courtesy of SUBARU OF AMERICA, INC.
  4. Release the lock by sliding the spring, and disconnect the PCV pipe assembly from the intake duct No. 1.
    G13619989Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the vacuum hose and the water hose.
    G13198588Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the intake duct No. 1.
    G13862370Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the gasket (A) and O-ring (B) from the intake duct No. 1.
    G14610465Courtesy of SUBARU OF AMERICA, INC.
  8. Disconnect the water hose from the intake duct No. 1.
    NOTE: Remove if necessary.
    G13619992Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals