Reverse Idler Gear: Adjustment
- Select the appropriate reverse idler gear bushing from the table below, and adjust until the clearance (a) between the reverse idler gear and reverse idler gear washer is within the standard value.
Specification:
0.1 - 0.3 mm (0.004 - 0.012 in)
Reverse idler gear bushing Part No. Thickness mm (in) Groove for identification 32289AA080 27.75 (1.093) None 32289AA090 27.90 (1.098) 1 32289AA100 28.05 (1.104) 2 32289AA110 28.20 (1.110) 3 32289AA120 28.35 (1.116) 4