LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> WRX Premium, Standard Trans >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle & Differential (TY75) >> Front Differential >> Installation

Front Differential: Installation

  1. Install the differential side retainers using the ST (WRENCH COMPL RETAINER).
  2. Install the taper roller bearing outer race to the transmission case.
  3. Install the front differential assembly.
    CAUTION:

    Make sure the oil seal lip is not folded. 

    G10323013Courtesy of SUBARU OF AMERICA, INC.
  4. Install the main shaft assembly. Ref. to MANUAL TRANSMISSION AND DIFFERENTIAL (TY75)>MAIN SHAFT>INSTALLATION 
  5. Install the drive pinion shaft assembly. Ref. to MANUAL TRANSMISSION AND DIFFERENTIAL (TY75)>DRIVE PINION SHAFT>INSTALLATION 
  6. Install the transmission case. Ref. to MANUAL TRANSMISSION AND DIFFERENTIAL (TY75)>TRANSMISSION CASE>INSTALLATION 
  7. Install the transfer case together with the extension case assembly. Ref. to MANUAL TRANSMISSION AND DIFFERENTIAL (TY75)>TRANSFER CASE AND EXTENSION CASE>INSTALLATION 
  8. Install the manual transmission assembly to the vehicle. Ref. to MANUAL TRANSMISSION AND DIFFERENTIAL (TY75)>TRANSMISSION ASSEMBLY>INSTALLATION 
scientia non olet · About LEMON Manuals