LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> WRX Premium, Standard Trans >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belt System >> Front Seat Belt >> Removal >> Belt Assembly Front Inn

Belt Assembly Front Inn

CAUTION:

Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to  AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION 

  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY
  2. Remove the front seats. Ref. to SEATS>FRONT SEAT>REMOVAL
  3. Remove the belt assembly front INN.
    1. Remove the clip for the seat belt harness located under the seat cushion.
    2. Remove the nut, and then remove the belt assembly front INN.
      NOTE:

      For details on harness routing behind the seat, refer to "SEATS". Ref. to  SEATS>FRONT SEAT>ASSEMBLY>CONNECTOR & HARNESS 

      • Driver's seat
        G14612304Courtesy of SUBARU OF AMERICA, INC.
      • Passenger's seat
        G14612305Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals