LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> WRX Premium, Standard Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System >> Airbag Connector >> Procedure >> Side impact sensor (front door)

Side impact sensor (front door)

  1. How to disconnect:
    NOTE:

    When pulling the slide lock or disconnecting the connector, be sure to hold the connector, not the harness, to disconnect. 

    1. Pull the lock arm (a) one step in the direction of arrow while pushing.
    2. Push the lock arm (a) again.
    3. Holding outer part, pull it in the direction of arrow to disconnect the connector.
      G14612219Courtesy of SUBARU OF AMERICA, INC.
  2. How to connect:
    NOTE:

    Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked. 

    Holding the connector, push it in securely until a clicking sound is heard.

scientia non olet · About LEMON Manuals