DTC P0801: Reverse Inhibit Control Circuit/Open
WARNING: This page is about a different variant/trim than selected.
DTC detecting condition:
Immediately at fault recognition
CAUTION:
After servicing or replacing faulty parts, perform the last step of the basic diagnostic procedure. Ref. to TRANSMISSION (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE
NOTE:
For diagnostic procedures, refer to "DTC B1016 SHIFT LOCK CIRCUIT" in "BODY CONTROL SYSTEM (DIAGNOSTICS)". Ref. to BODY CONTROL (DIAGNOSTICS)>DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC B1016 SHIFT LOCK CIRCUIT