Diagnostic Method
WARNING: This page is about a different variant/trim than selected.
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value |
|---|---|
| Actual pulley ratio change for 1 second | More than -0.08 |
| and | |
| Less than 0.08 | |
| Commanded duty of shift down pressure control solenoid | More than 80% |
Time needed for diagnosis: Table 1 s
TRANSMISSION FLUID TEMPERATURE AND TIME SPECIFICATION
| Transmission fluid temperature (°C) | -10 | 20 | 40 | 80 | 120 |
| Time Required (sec) | 1 | 0.3 | 0.25 | 0.25 | 0.25 |
Malfunction indicator light illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.