Diagnostic Method
WARNING: This page is about a different variant/trim than selected.
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value |
|---|---|
| Actual pulley ratio change for 1 second | More than -0.08 |
| Commanded duty of shift up pressure control solenoid | 90% or more |
Time needed for diagnosis: Table 1 s
TRANSMISSION FLUID TEMPERATURE AND ENGINE SPEED SPECIFICATION
| Transmission fluid temperature (°C) | ||||||
| -10 | 20 | 40 | 80 | 120 | ||
| Engine Speed (rpm) | 1000 | 1 | 1 | 1 | 1 | 1 |
| 2000 | 1 | 1 | 1 | 1 | 1 | |
| 2500 | 1 | 0.5 | 0.45 | 0.45 | 0.45 | |
| 3000 | 1 | 0.5 | 0.45 | 0.45 | 0.45 | |
| 4000 | 1 | 0.5 | 0.45 | 0.45 | 0.45 | |
| 5000 | 1 | 0.5 | 0.45 | 0.45 | 0.45 | |
| 6000 | 1 | 0.5 | 0.45 | 0.45 | 0.45 | |
Malfunction indicator light illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.