Diagnostic Method
WARNING: This page is about a different variant/trim than selected.
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value | ||
|---|---|---|---|
| ABS(1) (Target primary pulley shaft speed - Measured primary pulley shaft speed) | 600 rpm or more | ||
| (Commanded duty of shift up pressure control solenoid) | 90% or more | ||
| or | |||
| Commanded duty of shift down pressure control solenoid) | 90% or more | ||
|
|||
Time needed for diagnosis: 5 s
Malfunction indicator light illumination: Illuminates as soon as a malfunction occurs.