LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> WRX Premium, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (CVT Transaxle (Tr690)) >> Reduction Driven Gear >> Disassembly

Reduction Driven Gear: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the bearing retainer using ST1, ST2 and a press.
    CAUTION:

    Be careful not to drop the reduction driven gear. 

    Preparation tool: 

    ST1: INSTALLER (20099AE020)

    ST2: BEARING REMOVER (18767AA000)

    G14611370Courtesy of SUBARU OF AMERICA, INC.
  2. Using the ST1, ST2, ST3 and a press, remove the ball bearing from the reduction driven gear.
    CAUTION:

    Be careful not to drop the reduction driven gear. 

    Preparation tool: 

    ST1: REMOVER (899864100)

    ST2: SEAT (398497701)

    ST3: REMOVER (498077600)

    G13622208Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the snap ring.
scientia non olet · About LEMON Manuals