LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> WRX Premium, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (CVT Transaxle (Tr690)) >> Front Reduction Drive Gear >> Disassembly

Front Reduction Drive Gear: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the seal rings.
    G13622371Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the ball bearing (rear side) using ST1, ST2 and a press.
    CAUTION:

    Be careful not to drop the front reduction drive gear. 

    Preparation tool: 

    ST1: REMOVER (899864100)

    ST2: REMOVER (498077400)

    G13622372Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the ball bearing (front side) using the ST and a press.
    CAUTION:

    Be careful not to drop the front reduction drive gear. 

    Preparation tool: 

    ST: REMOVER (498077600)

    G13622373Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals