LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> WRX Premium, Standard Trans >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake Assembly (Rear Disc Brake) >> Removal >> Except For The Electronic Parking Brake Model

Except For The Electronic Parking Brake Model

  1. Release the parking brake.
  2. Remove the rear wheels. Ref. to WHEEL AND TIRE SYSTEM>TIRE AND WHEEL>REMOVAL .
  3. Remove the disc brake assembly rear and brake disc rear. Ref. to BRAKE>REAR DISC ROTOR>REMOVAL .
  4. Remove the spring A.
    G14602353Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the spring rod (a) and the strut (b).
    G14602354Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the spring adjuster (a) and the adjuster assembly (b).
    G14602355Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the shoe set pin (a) and the spring shoe clamp (b) and then remove the front brake shoe (c).
    G14602356Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the rear brake shoe.
    1. Remove the shoe set pin (a) and the spring shoe clamp (b) and then remove the rear brake shoe (c).
      G14602357Courtesy of SUBARU OF AMERICA, INC.
    2. Remove the cable assembly hand brake (a) from the parking lever (b).
      G14602358Courtesy of SUBARU OF AMERICA, INC.
  9. Remove the parking lever from the rear brake shoe.
    NOTE:

    Perform this procedure only when required. 

    1. Remove the ring retainer.
      G14602359Courtesy of SUBARU OF AMERICA, INC.
    2. Remove the spring washer (a) and then remove the parking lever (b) from the brake shoe.
      G14602360Courtesy of SUBARU OF AMERICA, INC.