DTC B2822: TCM Data Abnormal

DTC detecting condition:

Detected when there is no AT turbine speed input during driving and the TCM module is determined as abnormal. Detected when all of the following conditions are met:

Drive wheel average wheel speed is 15 km/h (9.3 MPH) or more
Engine speed is 1000 rpm or more.
Turbine speed is 0 or less.

Trouble symptom:

All functions of EyeSight system do not operate.

CAUTION:

Before performing diagnosis, refer to "CAUTION" in "General Description". Ref. to EYESIGHT (DIAGNOSTICS)>GENERAL DESCRIPTION>CAUTION

CHECK DTC .
Read the DTC of [Transmission] using the Subaru Select Monitor. Ref. to TRANSMISSION (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC)

Are any DTCs displayed? (Current code)

Yes : Perform the diagnosis for the displayed DTCs. Ref. to TRANSMISSION (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC)>LIST

No : Perform the diagnosis for LAN system. Ref. to LAN SYSTEM (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE>PROCEDURE