SUBARU Special Tool

ILLUSTRATION	TOOL NUMBER	DESCRIPTION	REMARKS
Courtesy of SUBARU OF AMERICA, INC.	926470000	AXLE SHAFT PULLER	Used for removing the drive shaft. NOTE: Used together with AXLE SHAFT PULLER PLATE (28099PA110).
Courtesy of SUBARU OF AMERICA, INC.	20099FG000	BUSHING REMOVER	Used for replacing the rubber bushing trailing link of rear axle housing. NOTE: Used together with base part of INSTALLER & REMOVER (20099PA010).
Courtesy of SUBARU OF AMERICA, INC.	20099PA010	INSTALLER & REMOVER	Used for replacing the rubber bushing trailing link of rear axle housing. NOTE: Used together with BUSHING REMOVER (20099FG000).
Courtesy of SUBARU OF AMERICA, INC.	28099AC000	BOOT BAND PLIER	Used for tightening the boot band of the front drive shaft.
Courtesy of SUBARU OF AMERICA, INC.	28099PA080	HUB STAND	Used for press-fitting hub bolt.
Courtesy of SUBARU OF AMERICA, INC.	28099PA110	AXLE SHAFT PULLER PLATE	Exchange with the plate of the AXLE SHAFT PULLER (926470000) to use.
Courtesy of SUBARU OF AMERICA, INC.	28399AG000	HUB STAND	Used for extracting hub bolt.
Courtesy of SUBARU OF AMERICA, INC.	28399SA010	OIL SEAL PROTECTOR	Used for installing the front drive shaft.
Courtesy of SUBARU OF AMERICA, INC.	-	SUBARU SELECT MONITOR 4	Used for setting of each function and troubleshooting for electrical system. NOTE: For detailed operation procedures, refer to "Help" of application. Used together with interface for Subaru Select Monitor (such as DST-i and DST-010).