LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> WRX Premium, Standard Trans >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Manual Transaxle & Differential (TY75) >> Switches and Harness >> Inspection >> Neutral Position Switch

Neutral Position Switch

  1. Turn the ignition switch to OFF.
  2. Disconnect the connector of neutral position switch.
  3. Measure the resistance between neutral position switch terminals.
    G09482564Courtesy of SUBARU OF AMERICA, INC.
    Gear shift position Terminal No. Specified resistance
    Neutral position 1 and 2 Less than 1 Ω
    Other positions 1 MΩ or more
  4. Replace faulty parts.
scientia non olet · About LEMON Manuals