LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> WRX Premium, Standard Trans >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Manual Transaxle & Differential (TY75) >> Switches and Harness >> Inspection >> Back-Up Light Switch

Back-Up Light Switch

  1. Turn the ignition switch to OFF.
  2. Disconnect the back light switch connector.
  3. Measure the resistance between the back-up light switch terminals.
    G09482564Courtesy of SUBARU OF AMERICA, INC.
    Gear shift position Terminal No. Specified resistance
    Reverse position 1 and 2 Less than 1 Ω
    Other positions 1 MΩ or more
  4. Replace faulty parts.
scientia non olet · About LEMON Manuals