LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> WRX Premium, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Exterior Trim & Interior Trim >> Rear Bumper >> Assembly

Rear Bumper: Assembly

  1. Install the cover fog rear.
  2. Install the cover muffler.
  3. Install the cover duct.
  4. Install the sonar bumper cable and the sonar sensor assembly. Ref. to REVERSE AUTOMATIC BRAKING>SENSOR AND HARNESS>INSTALLATION
  5. Install the reflex reflector. Ref. to LIGHTING SYSTEM>REFLEX REFLECTOR>INSTALLATION
scientia non olet · About LEMON Manuals