LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> WRX Premium, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Exterior Trim & Interior Trim >> Front Bumper >> Assembly

Front Bumper: Assembly

  1. Install the cover intake front.
  2. Using new bolts and well nuts, install the base license plate.
    CAUTION:

    Install the base license plate while pushing it against the bumper face. If a well nut slips, the bumper face mounting hole may become deformed. 

    Tightening torque: 

    1 N.m (0.1 kgf-m, 0.7 ft-lb)

  3. Install the arch garnish front.
  4. Install the cover fog front.
  5. Install the bracket fog light.
  6. Install the fog light assembly front. Ref. to LIGHTING SYSTEM>FRONT FOG LIGHT ASSEMBLY>INSTALLATION
  7. Install the front grille assembly.
scientia non olet · About LEMON Manuals