DTC B28AF: Stereo Camera Adjustment Incomplete
DTC detecting condition:
- When operation is aborted during adjustment or inspection of the stereo camera.
- When adjustment or inspection of stereo camera has not been completed normally.
- When, after the replacement of the stereo camera, adjustment or inspection of camera has not yet been performed.
Trouble symptom:
- All functions of EyeSight system do not operate.
- High beam assist does not operate.
NOTE:
When [Camera adjustment, inspection] is performed, and if it is not completed successfully, replace the camera. Ref. to EYESIGHT>STEREO CAMERA
Perform [Camera adjustment, inspection]. Ref. to EYESIGHT>CAMERA ADJUSTMENT, INSPECTION
When [Camera adjustment, inspection] is performed, and if it is not completed successfully, replace the camera. Ref. to EYESIGHT>STEREO CAMERA