LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> Forester Wilderness >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (CVT Transaxle System (Tr580) (Except For Wilderness)) >> Transfer Clutch >> Installation

Transfer Clutch: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the thrust bearing.
    NOTE: Make sure to install in the right direction.
    G10218706Courtesy of SUBARU OF AMERICA, INC.
  2. Select the transfer driven gear shim. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR580) (EXCEPT FOR WILDERNESS)>TRANSFER CLUTCH>ADJUSTMENT .
  3. Remove the transfer clutch from the extension case.
  4. Attach the selected transfer driven gear shim to extension case with vaseline.
  5. Install a new seal ring to the transfer clutch.
    NOTE: Apply CVTF to the seal rings.
  6. Install a new seal ring to the transfer driven gear.
    NOTE: Apply CVTF to the seal rings.
  7. Install the transfer clutch.
  8. Install the extension case. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR580) (EXCEPT FOR WILDERNESS)>EXTENSION CASE>INSTALLATION .
  9. Install the electric oil pump. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR580) (EXCEPT FOR WILDERNESS)>ELECTRIC FLUID PUMP>INSTALLATION .
  10. Install the transmission body. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR580) (EXCEPT FOR WILDERNESS)>TRANSMISSION ASSEMBLY>INSTALLATION .
scientia non olet · About LEMON Manuals