LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> Forester Wilderness >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (CVT Transaxle System (Tr580) (Except For Wilderness)) >> Primary Speed Sensor >> Removal

Primary Speed Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION: If water or oil contacts the connector terminal of primary speed sensor, replace it with a new part.
  1. Remove the transmission body. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR580) (EXCEPT FOR WILDERNESS)>TRANSMISSION ASSEMBLY>REMOVAL .
  2. Disconnect the connector, and remove the primary speed sensor.
G13225713Courtesy of SUBARU OF AMERICA, INC.