LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> Forester Wilderness >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (CVT Transaxle System (Tr580) (Except For Wilderness)) >> Preparation for Overhaul >> Procedure >> After Overhaul

After Overhaul

WARNING: This page is about a different variant/trim than selected.
  1. Install the torque converter. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR580) (EXCEPT FOR WILDERNESS)>TORQUE CONVERTER>INSTALLATION .
  2. Remove the filler plug (for overhaul), and refill approx. 10 L (10.6 US qt, 8.8 Imp qt) of CVTF.
    CAUTION: Always use specified CVTF. Using fluid other than specified CVTF will cause malfunction.

    CVTF: 

    Ref. to RECOMMENDED MATERIALS .

    G11255745Courtesy of SUBARU OF AMERICA, INC.
  3. Using a new gasket, install the filler plug (for overhaul).

    Tightening torque: 

    50 N.m (5.1 kgf-m, 36.9 ft-lb)