DTC B16F3: Front Sub Sensor LH Recognition Error
Diagnosis start condition:
When the ignition voltage is 10 - 16 V.
DTC detecting condition:
The front impact sensor LH is installed incorrectly.
The airbag control module is installed incorrectly.
CAUTION:
Before performing diagnosis, refer to "CAUTION" in "General Description". Ref. to AIRBAG (DIAGNOSTICS)>GENERAL DESCRIPTION>CAUTION
.
- CHECK THE FRONT IMPACT SENSOR
.
Check the part number printed on the sensor. Ref. to AIRBAG SYSTEM>IMPACT SENSOR>REMOVAL .
Is the part number correct?
Yes: Replace the airbag control module. Ref. to AIRBAG SYSTEM>AIRBAG CONTROL MODULE>REMOVAL .
No: Replace with a genuine sensor.