VSC (VDC) OFF Switch: Inspection

Measure the resistance between the VSC (VDC) OFF switch terminals.

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions	Standard
5 - 8	Switch OFF	1 MΩ or more
5 - 8	Switch ON	Less than 1 Ω

Measure the resistance between TRACK switch terminals.

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions	Standard
1 - 8	Switch OFF	1 MΩ or more
1 - 8	Switch ON	Less than 1 Ω

Apply battery voltage between the connector terminals to check lighting condition of illumination inside the switch.

CAUTION: When applying battery voltage, do not mix up the positive (+) side and the negative (-) side.
Incorrect polarity connection may cause LED damage inside the switch.

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions	Specification
2 (+) - 3 (-)	Apply battery voltage.	Light ON

Replace the console switch if it is found defective.