Instrument Panel Lower Cover: Removal: Inside

CAUTION:

• Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
• Be careful not to damage the airbag system harness when servicing the instrument panel. Damage may cause the system to malfunction.

1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
2. Remove the cover LWR driver INN.
   CAUTION: When removing the cover LWR driver, be sure to pull it toward you. If attempting to remove by turning it upward, the claws may be damaged.

Courtesy of SUBARU OF AMERICA, INC.

1. Remove the screws and release the clip.
2. Disconnect the in-vehicle sensor connector and aspirator hose, and then remove the cover LWR driver INN.

Courtesy of SUBARU OF AMERICA, INC.