Data Monitor: List
| Item | Contents | Standard/Unit | Note |
|---|---|---|---|
| IG on trip number | Time stamp information | Time | - |
| IG on supply system | Time stamp information | - | - |
| past time after IG on | Time stamp information | ms | - |
| +B voltage | Battery voltage value | 0 - 25 V | - |
| IGN voltage | Ignition power supply voltage value | 0 - 25 V | - |
| vehicle speed | Vehicle speed value detected by meter | 0 - 360.0 km/h | - |
| Engine speed | Engine speed value detected by meter | 0 - 16383 rpm | - |
| Engine coolant water temperature | Engine coolant temperature detected by meter | -40 - 214°C (-40 to 417°F) | - |
| Fuel level resistance [ohm] | Fuel sensor value display | 0 - 511.5 ohm | - |
| Fuel residual quantity indication value [L] | Remaining fuel quantity value display | 0 - 80 L | - |
| Ambient air temperature | External temperature sensor value display | -40 - 80°C (-40 to 176°F) | - |
| External air temperature indication value | Correction value for displaying ambient temperature | -40 - 80°C (-40 to 176°F) | - |
| Driver side seat belt state | Driver's seat belt fastened status | Driver's seat belt seated status Driver's seat belt not fastened status |
- |
| Passenger side seat belt state | Passenger's seat belt fastened status | Passenger's seat belt seated status Passenger's seat belt not fastened status |
- |
| Rear side (right) seat belt state | Rear right seat belt fastened status | Rear right seat belt seated status Rear right seat belt not fastened status |
- |
| Rear side (left) seat belt state | Rear left seat belt fastened status | Rear left seat belt seated status Rear left seat belt not fastened status |
- |
| ODO/TRIP switch input state | Input condition of ODO/TRIP switch is displayed | Switch OFF status Switch ON status |
- |
| TFT display reshuffling switch input state | Input condition of TFT display change switch is displayed | Switch OFF status Shift Up Switch ON status Shift Down Switch ON status i/SET Switch ON status Input indefinite status |
- |
| Illumination control switch input state | Input condition of illumination control switch is displayed | 0 - 100 % | - |
| Bright switch input state | Input condition of bright switch is displayed | Bright OFF status Bright ON status |
- |