LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System >> Spot Map Light >> Removal >> Models Without Eyesight

Models Without Eyesight

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Release the claws, and then remove the cover assembly map light.
    G16526850Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the light assembly map.
    1. Remove the screws and clips.
      G16526851Courtesy of SUBARU OF AMERICA, INC.
    2. Disconnect the connector, and remove the light assembly map.
  4. Remove the spot map light bulb.
CAUTION: Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.
NOTE: Perform this procedure only when required.
G16526852Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals