LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> WRX STI >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Intake System (Induction) And Turbocharger (2.5L) >> Air Cleaner Element >> Removal

Air Cleaner Element: Removal

  1. Disconnect the ground cable from battery.
  2. Disconnect the connector (A) from the mass air flow and intake air temperature sensor, and remove the harness clip (B).
  3. Loosen the clamp (C) which holds the air intake boot.
  4. Remove the clips (D) from the air cleaner case (front).
  5. Remove the power steering oil pressure hose (suction hose) (E) from the air cleaner case (rear).
    G12437597Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the air cleaner case (rear) and air intake boot.
  7. Remove the air cleaner element.
scientia non olet · About LEMON Manuals